External mirrors
First read and observe the introductory information and safety warn-
ings
on page 62.
Mirror heater
›
Set the rotary knob to position
The mirror heater only operates when the engine is running and up to an outside
temperature of +35 ℃.
Adjusting both mirrors in sync
›
Set the rotary dial to position or, on right-hand drive vehicles, into position
.» Fig. 50
The movement of the mirror surface is identical to the movement of
the rotary knob.
The synchronous adjustment of the two mirrors can be activated/deactivated via
the information display in the menu item Mirror adjust
Adjusting the front passenger's mirror
›
Set the rotary dial to position or, on right-hand drive vehicles, into position
.» Fig. 50
The movement of the mirror surface is identical to the movement of
the rotary knob.
Switching off operating control
›
Set the rotary knob to position
» Fig.
Folding-in both of the exterior mirrors with the rotary knob
›
Set the rotary knob to position
It is only possible to fold in both exterior mirrors when the ignition is switched on
and at a speed of up to 15 km/h.
The mirrors are folded back into the driving position after the rotary knob is
turned from the position to a different one.
64
Using the system
Fig. 50
Rotary knob
» Fig.
50.
» page
27.
50.
» Fig.
50.
Folding-in both of the exterior mirrors using the remote control key
›
If all the windows are closed, press and hold the symbol button on the re-
mote control key for approx. 2 seconds.
The exterior mirror is folded back into the driving position when the ignition is
switched on.
Automatic dimming mirror
The exterior mirrors are dimmed together with the automatic dimming interior
mirror
» page
63.
Tilting surface of front passenger mirror
On vehicles fitted with the memory function for the driver's seat
surface of the mirror tilts down slightly when the reverse gear is engaged and the
rotary knob is in the position or in position on vehicles with right-hand
drive
» Fig.
50. This provides an aid in seeing the kerb of the pavement when
parking the car.
The mirror returns into its initial position, after the rotary knob is moved out of
the position or position on vehicles with right-hand drive, and put into another
position or if the speed is more than 15 km/h.
The tilt of the mirror surface can be activated/deactivated via the information dis-
play in the menu item Mirror down
Memory function for mirrors
On vehicles fitted with a memory function for the driver seat, the relevant setting
for the exterior mirrors is also stored automatically when the seat position is stor-
ed
» page
68.
» page
» page
27.
68, the