Figure 11- 2 . Web-based Access Control Authentication Login window
After successfully logging in, the user will be prompted with this window, verifying that the user has successfully authenticated
the WAC port.
NOTE: The previous logout screen may have some problems when using Netscape 7.0.
If the port where Web-Access Control is preset to be moved to a VLAN without an IPIF
interface, the previous logout screen may also not be presented when logging in.
Trust Host
Go to the Security folder and click on the Trust Host link; the following window will appear.
Use the Security IP Management to permit remote stations to manage the Switch. If you choose to define one or more designated
management stations, only the chosen stations, as defined by IP address, will be allowed management privilege through the web
manager or Telnet session. To define a management station IP setting, type in the IP address and the corresponding Net Mask and
click the Apply button.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
5
Figure 11- 2 . WAC logout window
Figure 11- 2 . Security IP window
6
7
289