D-Link DGS-3600 Series User Manual page 166

To add a new IPv6 interface, click the Add button, which will display the following window.
To add an Interface, enter an Interface Name in the field provided, along with a corresponding VLAN Name, set the Interface
Admin. State to Enabled and click Apply. Newly created interfaces will appear in the IPv6 Interface Settings window.
To change the settings for a configured Interface, click the corresponding Modify button, which will display the following
window for the user to configure.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 8- 4. IPv6 Interface Settings window
Figure 8- 5. IPv6 Interface Settings – Add window
Figure 8- 6. IPv6 Interface Settings – Edit window
150