D-Link DGS-3600 Series User Manual page 174
Xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for DGS-3600 Series:
- User manual (433 pages) ,
- Cli manual (431 pages) ,
- Hardware installation manual (66 pages)
Table of Contents
Advertisement
The following fields can be viewed or set:
Parameter
RIP (1-999)
OSPF Intra (1-999)
STATIC (1-999)
OSPF Inter (1-999)
OSPF ExtT1 (1-999)
OSPF ExtT2 (1-999)
Click Apply to implement changes made.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 8- 13. Route Preference Settings window
Description
Enter a value between 1 and 999 to set the route preference for RIP. The lower the value,
the higher the chance the specified protocol will be chosen as the best path for routing
packets. The default value is 100.
Enter a value between 1 and 999 to set the route preference for OSPF Intra. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 80.
Enter a value between 1 and 999 to set the route preference for Static. The lower the value,
the higher the chance the specified protocol will be chosen as the best path for routing
packets. The default value is 60.
Enter a value between 1 and 999 to set the route preference for OSPF Inter. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 90.
Enter a value between 1 and 999 to set the route preference for OSPF ExtT1. The lower
the value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 110.
Enter a value between 1 and 999 to set the route preference for OSPF ExtT2. The lower
the value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 115.
158
Advertisement
Table of Contents
