D-Link DGS-3600 Series User Manual page 255

Xstack dgs-3600 series layer 3 gigabit ethernet managed switch

Hide thumbs Also See for DGS-3600 Series:

Table of Contents

Configure the following Access Rule Configuration settings for IP:

This is the identifier number for this profile set.

Select Permit to specify that the packets that match the access profile are forwarded by the Switch,

according to any additional rule added (see below).

Select Deny to specify that packets that do not match the access profile are not forwarded by the

Switch and will be filtered.

Select Mirror to specify that packets that match the access profile are mirrored to a port defined in

the Port Mirroring window. Port Mirroring must be enabled and a target port must be set.

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch

Figure 10- 11. Access Rule Display window (Ethernet)

Figure 10- 1 . Access Rule Configuration window (IP)