Trust Host - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack
The following parameters can be configured:
Parameter
Port List
State
Click Find to display the Host table entries or click Delete to remove an entry.

Trust Host

The Switch allows users to enter trusted host secure IP addresses and netmasks used for remote Switch management. It should be
noted that if one or more trusted hosts are enabled, the Switch will immediately accept remote instructions from only the specified
IP address or addresses. If you enable this feature, be sure to first enter the IP address of the station you are currently using.
To view this window, click Security > Trust Host, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 6 - 38 WAC Host Table Settings window
Description
Enter the ports you wish to Find or Delete. Check the All Ports box to select all ports.
Select the state of the ports. Choose between Authenticated, Authenticating or Blocked.
308