Configuring Trust Host - D-Link DGS-3100 SERIES User Manual

Configuring Trust Host

The Trusted Host Page enables network managers to apply restrictions on managing the device from remote stations.
Network managers can configure up to 30 remote stations. Only those stations that are included in this list may manage the
device. Ensure that the IP address from which the device is currently being configured is included to prevent disconnection.
To enable Trust Host:
1. Click Security > Trusted Host. The Trusted Host Page opens:
The Trusted Host Page contains the following fields:
Field
IP Address (1-30)
Network Mask (1-30)
Telnet
SNMP
HTTP
HTTPS
SSH
Ping
Figure 5-2 Trusted Host Page
Description
Defines the management station IP address from which the device can be managed.
Defines the management station IP Subnet Mask from which the device can be managed.
If selected, permits Telnet access to be used for management access to the device.
If selected, permits SNMP access to be used for management access to the device.
If selected, permits HTTP access to be used for management access to the device.
If selected, permits HTTPS (Secure HTTP) access to be used for management access to the
device.
If selected, permits SSH (Secure Telnet) access to be used for management access to the
device.
If selected, permits the host to ping the device.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
140