System Log Entries - D-Link DGS-3600 Series User Manual

System Log Entries

The following table lists all possible entries and their corresponding meanings that will appear in the System Log of this Switch.
Event
Category
Description
system System started up
system System started up
Configuration
saved to flash
Internal Power
failed
Internal Power is
recovered
Redundant Power
failed
Redundant Power
is working
Firmware
up/down-
successfully
load
uploaded
Firmware upload
was unsuccessful
Firmware
upgraded
successfully
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Log Content
System warm start
System cold start
Configuration and log saved
to flash by console
(Username: <username>, IP:
<ipaddr>, MAC: <macaddr>)
Internal Power failed
Internal Power is recovered
Redundant Power failed
Redundant Power is working
Firmware successfully
uploaded by console
(Username:<username>,
IP:<ipaddr>, MAC:<macaddr>)
Firmware upload by console
was unsuccessful
(Username:<username>,
IP:<ipaddr>, MAC:<macaddr>)
Firmware upgraded by
console successfully
(Username: <username>, IP:
<ipaddr>, MAC: <macaddr>)
Appendix C
Severity
Critical
Critical
Informational
Critical
Critical
Critical
Critical
Informational
Warning
Informational
358
Remark
"by console" and "IP:
<ipaddr>, MAC: <macaddr>"
are XOR shown in log strings,
which means if the user logs
in through the console, no IP
or MAC address information
will be included in the log.
by console and "IP: <ipaddr>,
MAC: <macaddr>" are XOR
shown in log string, which
means if the user logs in by
console, there will be no IP
and MAC information for
logging.
by console and "IP: <ipaddr>,
MAC: <macaddr>" are XOR
shown in log string, which
means if the user logs in by
console, there will be no IP
and MAC information for
logging.
by console and "IP: <ipaddr>,
MAC: <macaddr>" are XOR
shown in log string, which
means if the user logs in
through the console, no IP or
MAC address information will
be included in the log.