Port Description; User Accounts - D-Link DGS-3600 Series User Manual

Port Description

The Switch supports a port description feature where
the user may name various ports on the Switch. To
assign names to various ports, click Administration >
Port Configuration > Port Description to view the
following window:
Use the From and To pull-down menu to choose a port
or range of ports to describe, and then enter a
description of the port(s). Click Apply to set the
descriptions in the Port Description Table.
The Medium Type applies only to the Combo ports. If
configuring the Combo ports this defines the type of
transport medium used. SFP ports should be nominated
Fiber and the Combo 1000BASE-T ports should be
nominated Copper. The result will be displayed in the
appropriate switch port number slot (C for copper ports
and F for fiber ports).

User Accounts

Use the User Account Management window to control user privileges. To view existing User Accounts, open the
Administration folder and click on the User Accounts link. This will open the User Account Management window, as shown
below.
To add a new user, click on the Add button. To modify or delete an existing user, click on the Modify button for that user.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 6- 10. User Accounts window
Figure 6- 9. Port Description window
39