D-Link DGS-3600 Series User Manual page 90

The following fields can be set or modified:
Parameter
Analyzer Server (1-
4)
Owner
Timeout (1-2000000
sec)
Collector Address
Collector Port (1-
65535)
Max Datagram Size
(300-1400)
Click Apply to save changes made.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 6- 56. sFlow Counter Analyzer – Add window
Description
Enter an integer from 1 to 4 to denote the sFlow Analyzer to be added. Up to four entries can
be added, but each entry must have its own unique Collector Port.
Users may enter an alphanumeric string of up to 16 characters to define the owner of this
entry. Users are encouraged to give this field a name that will help them identify this entry.
When an entry is made in this field, the following Timeout field is automatically set to 400
seconds, unless the user alters the Timeout field.
This field is used to specify the timeout for the Analyzer server. When the server times out, all
sFlow samples and counter polls associated with this server will be deleted. The user may set
a time between 1 and 2000000 seconds with a default setting of 400 seconds.
The IP address of the sFlow Analyzer Server. If this field is not specified, the entry will become
0.0.0.0 and therefore the entry will be inactive. Users must set this field.
The destination UDP port where sFlow datagrams will be sent. The default setting for this field
is 6343. Only one Analyzer Server address can be set for one UDP Collector Port.
This field will specify the maximum number of data bytes that can be packaged into a single
sFlow datagram. Users may select a value between 300 and 1400 bytes with a default setting
of 1400 bytes.
74