Front-Panel Components - D-Link DGS-3600 Series User Manual

NOTE: The SFP combo ports on the Switch cannot be used simultaneously with the
corresponding 1000BASE-T ports. If both ports are in use at the same time (ex. port 1 of
the SFP and port 1 of the 1000BASE-T), the SFP ports will take priority over the combo
ports and render the 1000BASE-T ports inoperable.

Front-Panel Components

DGS-3612
•
Twelve 10/100/1000BASE-T ports
•
Four Combo SFP ports located to the right
•
One female DCE RS -232 DB-9 console port
•
LEDs for Power, Console, RPS, and Link/Act/Speed for each port
DGS-3612G
•
Twelve SFP 100/1000Mbps ports
•
Four Combo 1000BASE-T ports located to the right
•
One female DCE RS -232 DB-9 console port
•
LEDs for Power, Console, RPS, and Link/Act/Speed for each port
DGS-3627
•
Twenty-four 10/100/1000BASE-T ports
•
Four Combo SFP ports located to the right
•
One female DCE RS-232 DB-9 console port
•
LEDs for Power, Console, RPS, Link/Act/Speed and 10GE for each port
•
Stacking Module Numbered LED
DGS-3627G
•
Twenty-four SFP 1000Mbps ports
•
Four Combo 1000BASE-T ports located to the right
•
One female DCE RS -232 DB-9 console port
•
LEDs for Power, Console, RPS, Link/Act/Speed and 10GE for each port
•
Stacking Module Numbered LED
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 1- 1. Front Panel of the DGS-3612
Figure 1- 2. Front Panel of the DGS-3612G
Figure 1- 3. Front Panel of the DGS-3627
2