5.10
Expansion Board
The Net PC model (top) has two PCI expansion slots 1.
The Small Form Factor model (bottom) has one PCI 1 and one PCI/ISA combination slot 2.
1. Prepare the computer for disassembly (Section 5.4).
2. Remove the system unit cover (Section 5.7).
3. Remove the expansion board cage (Section 5.9).
4. Remove the retaining screw that secures the board to the expansion board cage, and remove the
expansion board.
Removing the Expansion Board
To replace the expansion board, reverse the removal procedure.
If you are installing an expansion board for the first time, remove the desired
expansion board slot cover before installing the board.
The computer should automatically recognize the added plug and play expansion board.
Only 7-inch long expansion boards may be used in these models.
5-18
Removal & Replacement Procedures