Power Button - Compaq Deskpro EN Series Maintenance & Service Manual

5.16.2

Power Button

It is not necessary to remove the front bezel from the system unit cover to remove the power
button.
1. Prepare the computer for disassembly (Section 5.4).
2. Remove the system unit cover (Section 5.7).
3. Place the system unit cover assembly top down on a protected work surface. Pinch together the
two tabs on the rear of the power button, and push the button out of the front bezel. The spring
will follow the button out of the housing.
Removing the Power Button (Small Form Factor Shown)
To replace the power button, reverse the removal procedure.
Compaq Deskpro EN Series, Small Form Factor and Net PC Models 5-31