Confidential
2.2 Connectors
2.2.1 Interface Connectors
Refer to Section 2.1, Interfaces.
2.2.2 Power Supply Connector
This connector is used to connect the printer to an external power source.
1) Pin assignments:
NOTE: Be sure to ground the metal of the interface using the hole for the frame ground.
2) Connector model:
EPSON
Refer to Table 2.2.1.
Table 2.2.1 Power Supply Connector Pin Assignments
Pin Number
1
2
3
SHELL
Figure 2.2.1 Power Supply Connector
Printer side:
User side:
TITLE
TM-T90
Specification
(STANDARD)
Signal Name
+24 V
GND
NC
Frame GND
SHELL
Hosiden TCS7960-532010 or equivalent
Hosiden TCP8927-631100 or equivalent
Hosiden TCP8927-531100 or equivalent
SHEET
REVISION
NO.
NEXT
SHEET
F
30
29