Function 48> Gs ( K Pl Ph Fn M (Fn = 48) - Epson TM-T90 Specification

Confidential
GS ( K p p fn m
L H
[Name] Print control method(s)
[Description] • Set the print control specified by fn.
fn
48 GS ( K p
49
GS ( K p
50
GS ( K p
97
GS ( K p
• The density of printing with the four-part energizing on the two-color paper may not be
[Notes]
changed.
• To improve the quality of two-color printing, it is recommended to print with two-part
energizing.
<Function 48> GS ( K p
[Format] ASCII
Hex
Decimal
× 256) = 2 (p
[Range] (p + p
L H
fn = 48
1 ≤ m ≤ 4, 49 ≤ m ≤ 52
[Default] m = 1
[Description] • Selects the print control mode.
m
1, 49
2, 50
3, 51
4, 52
• When (m = 3, 4, 51, or 52), the paper may be fed for the maximum 10 dot lines.
[Note]
EPSON
Format
Function No.
p fn m
L H
p fn m
L H
p fn m
L H
p fn m
L H
p fn m (fn = 48)
L H
GS ( K p
1D 28 4B p
29 40 75 p
= 2, p = 0)
L H
Print control mode
Selects print control mode 1 (standard).
Selects print control mode 2 (fence bar code).
Selects print control mode 3 (ladder bar code).
Selects print control mode 4 (2-dimensional code).
TITLE
TM-T90
Specification
(STANDARD)
48 Specifies the print control mode.
49 Sets the print density.
50 Sets the print speed.
97 Sets the number of parts for energizing the
head.
p fn m
L H
p fn m
L H
p fn m
L H
SHEET
REVISION
Function
NO.
NEXT SHEET
F
136 135