Hexadecimal Dumping - Epson TM-T90 Specification

Confidential

3.6 Hexadecimal Dumping

1) Hexadecimal dumping function
This function prints the data transmitted from the host computer in hexadecimal numbers and in
their corresponding characters.
2) Starting hexadecimal dumping
Open the cover and turn the power on while pressing the paper FEED button (located inside the
printer) or executing the GS ( A command; then close the cover.
"Hexadecimal Dump
hexadecimal numbers and in their corresponding characters.
NOTES: 1. If a character does not correspond to the data received, the printer prints ".".
2. During hexadecimal dumping, any commands other than DLE EOT, DLE ENQ, and
DLE DC4 do not function.
3. Insufficient print data to fill the last line can be printed by setting the printer Offline.
3) Ending hexadecimal dumping
Hexadecimal dumping ends by turning the power off, pressing the paper FEED button three times,
or resetting the printer after printing has finished.
<Printing example>
Hexadecimal Dump
To terminate hexadecimal dump,
press FEED button three times.
1B 21 00 1B 26 02 40 40 1B 69
1B 25 01 1B 63 34 00 1B 30 31
41 42 43 44 45 46 47 48 49 4A
EPSON
To terminate ..." on the paper roll and prints the received print data in
*** completed ***
TITLE
TM-T90
Specification
(STANDARD)
. ! . . & . @@ . i
. % . . c 4 . . 0 1
A B C D E F G H I J
SHEET
REVISION
F
The printer first prints
NO.
NEXT SHEET
64 63