Environmental Conditions - Epson TM-T90 Specification

Confidential

1.13 Environmental Conditions

1) Temperature:
2) Humidity:
Figure 1.13.1 Operating Temperature and Humidity Range
NOTE: If the printer is not used for a long time with paper installed, some part of the printing may be
light, due to the deformation of the paper. If the printer is not used for a long time with paper
installed, be sure to feed paper approximately 30 mm {1.18"} before printing.
3) Vibration resistance:
4) Impact resistance:
EPSON
Operating:
Storage:
Operating:
Storage:
[% RH]
90
80
60
Relative humidity
40
20
10
0
When packed:
No external or internal damage should be found after the vibration test,
and the unit should operate normally.
When packed:
No external or internal damage should be found after the drop test, and
the unit should operate normally.
When unpacked: Height:
When the printer is not printing, no external or internal damage should
be found after the drop test.
TITLE
TM-T90
Specification
(STANDARD)
5 to 45°C {41 to 113°F}
-10 to 50°C {14 to 122°F} (except for paper)
10 to 90% RH
10 to 90% RH (except for paper)
Operating environment
range
0 10 20 30
Ambient
temperature
Frequency: 5 to 55 Hz
Acceleration: Approximately 19.6 m/s
Sweep: 10 minutes (half cycle)
Duration: 1 hour
Directions: x, y, and z
Package: EPSON standard package
Height: 60 cm {23.62"}
Directions: 1 corner, 3 edges, and 6 surfaces
5 cm {1.97"}
Directions: Lift one edge and release it
(for all 4 edges).
SHEET
REVISION
34 ˚C, 90 %
40 ˚C, 65 %
45 ˚C, 50 %
40 50
[˚C]
2
{2 G}
NO.
NEXT SHEET
F
15 14