Function 1> Gs ( M Pl Ph Fn M (Fn = 1,49); Function 2> Gs ( M Pl Ph Fn M (Fn = 2,50); Function 3> Gs ( M Pl Ph Fn M (Fn = 3,51) - Epson TM-T90 Specification

Confidential
<Function 1> GS ( M p
[Format] ASCII
Hex
Decimal
× 256) = 2 (p
[Range] (p + p
L H
fn = 1, 49
m = 1, 49
[Description] • Copies the setting stored in the active area to the mth storage area.
• Frequent write command executions by this command may damage the NV memory.
[Notes]
Therefore, it is recommended to write to the NV memory no more than 10 times a day.
• While processing this command, the printer is BUSY while writing data to the NV user
memory and stops receiving data. Therefore it is prohibited to transmit data, including the
real-time commands, during the execution of this command.
<Function 2> GS ( M p
[Format] ASCII
Hex
Decimal
× 256) = 2 (p
[Range] (p + p
L H
fn = 2, 50
m = 0, 1, 48, 49
[Description] • When (m = 0, 48), initializes all settings in the active area, as described in these
specifications.
• When (m = 1, 49), copies the setting stored in the mth storage area to the active area. If no
data in the storage area is protected, all settings in the active area are initialized, as described
in these specifications.
<Function 3> GS ( M p
[Format] ASCII
Hex
Decimal
× 256) = 2 (p
[Range] (p + p
L H
fn = 3, 51
m = 0, 1, 48, 49
[Description] • When (m = 0, 48), does not load data in the storage area to the active area upon initialization.
• When (m = 1, 49), loads data in the storage area to the active area upon initialization.
EPSON
p fn m (fn = 1,49)
L H
GS ( M p
1D 28 4D p
29 40 77 p
= 2, p = 0)
L H
p fn m (fn = 2,50)
L H
GS ( M p
1D 28 4D p
29 40 77 p
= 2, p = 0)
L H
p fn m (fn = 3,51)
L H
GS ( M p
1D 28 4D p
29 40 77 p
= 2, p = 0)
L H
TITLE
TM-T90
Specification
(STANDARD)
p fn m
L H
p fn m
L H
p fn m
L H
p fn m
L H
p fn m
L H
p fn m
L H
p fn m
L H
p fn m
L H
p fn m
L H
SHEET
REVISION
NO.
NEXT SHEET
F
150 149