Epson TM-T90 Specification page 166

Confidential
[Description] • Stores the raster graphics data, enlarged by bx and by in the horizontal and vertical directions
in the print buffer.
•
x , x
L H
•
y , y
L H
•
c specifies the color of the defined data.
c
49
50
•
Color 1 means black (a high level of energy) on the specified two-color thermal paper.
•
Color 2 means red (a low level of energy) on the specified two-color thermal paper.
• In standard mode, each color can be defined only once.
[Note]
GS ( M p p fn m
L H
[Name] Customize printer
[Description] • Protects or recovers values or data set or defined in the active area by commands.
fn
1, 49
2, 50
3, 51
•
Active area:
•
Storage area:
• List of commands that are affected by this command.
Setting value
Status
Defined data
Characters
Kind of character
Style
Etc.
Bar codes
2-dimensional codes
Print position
Etc.
EPSON
specify the raster graphics data in the horizontal direction as (x
specify the raster graphics data in the vertical direction as (y
Printing color
Color 1
Color 2
Format
GS ( M p p fn m
L H
GS ( M p p fn m
L H
GS ( M p p fn m
L H
Volatile memory (RAM)
Non-volatile memory (Flash ROM)
Command
ESC c 3, GS a
GS :
ESC M, ESC R, ESC t
ESC !, ESC –, ESC E, ESC G, ESC V, ESC {, GS !, GS B,
GS b, GS ( N
ESC SP, ESC 2, ESC 3
GS H, GS f, GS h, GS w
GS ( k <Function 065> through <Function 070>
ESC D, ESC T, ESC a, GS L, GS W
ESC c 4, ESC c 5, GS ( D, GS ( H <Function 49>, GS P
TITLE
TM-T90
Specification
(STANDARD)
.
Function No
1 Copies the settings stored in the active area
to the storage area (save settings).
2 Copies the settings stored in the storage area
to the active area (load settings).
3 Enables or disables automatic loading of the
settings upon initialization.
SHEET
REVISION
× 256) dots.
+ x
L H
× 256) dots.
+ y
L H
Function
NO.
NEXT SHEET
F
149 148