Epson TM-T90 Specification page 52

Confidential
Command
GS ^
GS a
GS b
GS f
GS g 0
GS g 2
GS h
GS k
GS r
GS w
Kanji command list
(when the Japanese, Simplified Chinese, Traditional Chinese, or Korean model is used)
Command
FS !
FS &
FS ( A (*)
FS –
FS .
FS 2
FS C
FS S
FS W
(*): FS ( A is effective only in Japanese model.
The commands listed below in the first column are defined as "obsolete commands" in the ESC/POS
command system. This printer supports both upward-compatible commands and obsolete
commands. However, the upward-compatible commands are recommended for use.
Print NV bit image
FS p
Define NV bit image
FS q
Print raster bit image
GS v 0
NOTE: "Obsolete commands" are commands that are supported by legacy models; however it is
recommended to replace them with upward-compatible commands, because they will not be
supported in the future products.
EPSON
Execute macro
Enable/disable Automatic Status Back (ASB)
Turn smoothing mode on/off
Select font for HRI characters
Initialize maintenance counter
Transmit maintenance counter
Set bar code height
Print bar code
Transmit status
Set bar code width
Set print mode(s) for Kanji characters
Select Kanji character mode
Select Kanji character style(s)
Turn underline mode on/off for Kanji characters
Cancel Kanji character mode
Define user-defined Kanji characters
Select Kanji character code system
Set left- and right-side Kanji character spacing
Turn quadruple-size mode on/off for Kanji characters
Obsolete command
TITLE
TM-T90
Specification
(STANDARD)
Name
Name
Upward-compatible command
GS ( L <Function 69>
GS ( L <Function 67>
GS ( L <Function 112 + 50>
SHEET NO.
REVISION
NEXT
F
®
SHEET
35 34