Tdif Outputs; Configuring The Tdif Outputs - SoundCraft RM1ds User Manual

RM1d/RM1ds User Guide

TDIF Outputs

TDIF Outputs
TDIF Outputs TDIF Outputs TDIF Outputs
The TDIF connector found on the rear of the RM1d is very useful for creating more inputs and
outputs in either digital or analogue formats.
The TDIF connector can very simply be connected for example to an 8 track digital tape machine
or hard disk recorder for playback or recording, or it could be connected to a Soundcraft TDIF
interface box to expand both analogue or digital input capabilities.
The choices available are:
l
Mic/Line - Balanced x 8.
l
AES/EBU Interface - x 8 (mono) 4 (stereo).
l
Unbalanced Analogue - x 8.
The TDIF outputs are configured in pairs and may derive their output signals from the following
sources:

Configuring the TDIF Outputs

1 Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2 Use the PARAMETER encoder to scroll through the menu pages to locate the TDIF
OUTPUTS menu page.
The SETUP button will flash upon selection.
3 Press the SETUP button to enter the TDIF OUTPUTS set-up mode
The LCD display will show the current selection:
87