Table of Contents
Advertisement
RM1d/RM1ds User Guide
Re-Initialising the RM1d
Re-Initialising the RM1d
Re-Initialising the RM1d
Re-Initialising the RM1d
Re-Initialising the RM1d
There are four different re-initialising processes that can be performed on the RM1d.
Total Reset of the RM1d
Totally resetting the RM1d will take it back to the state it was in when it left the factory and will
delete all information stored in the console. This mode is useful if you have purchased the
console second hand and would like to reset it to its default state. To perform a total reset do
the following:
1
Make sure the console is turned off.
2
Whilst holding down the UP/DOWN/LEFT/RIGHT arrow buttons switch the console on
again.
3
Continue to hold the arrow buttons until the LCD display shows the following
message:
FX/DYN Presets Reset
Performing this reset will delete only the FX and Dynamics Presets stored in the user memory
locations.
1
Make sure the console is turned off.
2
Whilst holding down the LEFT/RIGHT arrow buttons switch the console on again.
3
Continue to hold the arrow buttons until the LCD display shows the following
message:
137
Advertisement
Table of Contents
