Assign Channel; Choosing And Assigning The Input Source - SoundCraft RM1ds User Manual

RM1d/RM1ds User Guide

Assign CHANNEL

Assign CHANNEL
Assign CHANNEL Assign CHANNEL Assign CHANNEL
The RM1d is designed to offer maximum flexibility concerning input routing. Every channel has
two inputs, that can handle mono or stereo analogue or digital input sources. These input
signals can be sourced from a pool of digital or analogue inputs.
(See table below).
A complete input set-up configuration can then be saved as part of a snapshot Preset for
instant recall. This allows the operator to quickly reconfigure the console for different applications.

Choosing and Assigning the Input Source

1 Press the SETUP button found below the LCD display.
This will enter the SETUP mode.
2 Use the PARAMETER encoder to scroll through the menu pages to locate the ASSIGN
CHANNEL menu.
The SETUP button will flash upon selection.
3 Press the SETUP button to enter the ASSIGN CHANNEL mode.
The LCD display will read:
You can now choose what type of input source you would like to assign, and to which
of the two inputs of the chosen channel you would like to assign the input to.
4 Press the EDIT button on the desired channel and select either Input 1 or Input 2 using
the INPUT 2 button (this will be unlit for Input 1 or lit for Input 2).
The LCD display will now show the selected channel, and which input is currently
selected. If for example the EDIT button is selected on Channel 1 and the INPUT 2
button pressed (illuminated), Input 2 will become active. The LCD display will read:
55