118
Automatic Operation
The timers can be controlled automatically by the channel faders. (There is a menu to enable
the triggering actions to be configured).
1.
Press the SETUP button just below the timer displays. The LCD display will show:
2.
Press the EDIT button on the channel you want to configure.
3.
Now press the RIGHT arrow button and use the PARAMETER encoder to select which
mode you would like to use. (See the table below)
NOTE: The automatic timer Setup does not effect the manual operation of the timers,
i.e. a timer may be manually operated even though it is configured for automatic
fader operation.
NOTE: The channel fader action on the timers is independent of the channel ON/OFF state.
RM1d/RM1ds User Guide