Master Section; Backlit Lcd Display; Navigation Buttons And Parameter Encoder - SoundCraft RM1ds User Manual

44

Master Section

Master Section
Master Section Master Section Master Section

Backlit LCD Display

Global console parameters and channel settings can be viewed and edited from this screen.
The LCD display (23) can operate in one of 6 modes which are selected either by pressing one
of the 4 buttons directly underneath the LCD display window, or by pressing the FX EDIT button
in the Lexicon TM section, or by pressing the timer SETUP button found below the left hand timer
(TIMER 1) (see page 8.3).
The available modes are:
SETUP Enters the SETUP menu pages
DYN Enters the DYNAMICS menu pages
EDIT LCD screen display of EDIT STRIP parameter adjustments.
PRESETS Enters the PRESETS menu pages
FX EDIT Enters the Lexicon FX EDIT menu pages
SETUP (TIMER Section) Enters the timer SETUP menu pages
NOTE: If none of the above modes are active the display will show the currently 'last
recalled' preset name in the bottom line and RM1d DIGITAL in the top line

Navigation Buttons and PARAMETER encoder

Used in conjunction with the LCD display above, the four triangular buttons (24) allow the user
to navigate the various menus in order to select parameter data.
The PARAMETER encoder is used to scroll through lists of available parameter data. When
making alphanumeric entries, you can scroll from 'A-Z' (Upper Case), through 'a-z' (Lower
Case) and through '0-9'.
The UP arrow button will step through numeric values '0-9' only and the DOWN arrow button will
insert a space. Certain punctuation characters are also available.
Most changes happen in 'real time', i.e. as the encoder is turned, new data is applied immediately.
The only time you need to confirm an entry is if the SETUP button blinks. The navigation buttons
will illuminate to guide you to the next line of the LCD display or to the next branch of the menu
tree.
RM1d/RM1ds User Guide