Table of Contents
Advertisement
RM1d/RM1ds User Guide
Custom Configuration of the Machine Starts
Although the default settings will suffice for most applications there may be times when you
might want to change the relay assignment for a particular input.
1
Press the SETUP button found below the LCD display
This will enter the SETUP mode
2
Use the PARAMETER encoder to scroll through the menu pages to locate the
MACHINE STARTS menu page.
3
The SETUP button will flash upon selection
4
Press the SETUP button to enter the MACHINE STARTS set-up mode.
5
The LCD display will show the current setting:
6
To change the relay assignment for MIC/LINE 1 press the DOWN ARROW button so
that 'Rly 02' flashes in the lower field of the display.
7
Now use the PARAMETER encoder to select the relay number you want to use.
8
Press the SETUP button to exit the Menu
NOTE: Relay assignments work according to the table found above i.e. on a 12 fader console
some inputs are fixed for use on Remotes 2 and 3 respectively and cannot be
reassigned.
77
Advertisement
Table of Contents
