15Wy D-Type Fml; A Note On The Analogue I/O Connector - SoundCraft RM1ds User Manual

134

15wy D-type FML

Pin Function
1 Remote In 4
2 Remote In 3
3 Remote In 2
4 Remote In 1
5 RESERVED
6 RESERVED
7 Studio Mute A
8 C/RM Mute A

A note on the Analogue I/O Connector

The Analogue I/O connector is used for the following analogue inputs and outputs:
External stereo monitor source inputs 1-4, Aux 1,2 outputs, Clean Feed 1,2 outputs, Stereo PFL
outputs and Cue Speaker outputs. All inputs and outputs are balanced.
37wy D-type FML
Pin Function
1 Audio Ground
2 Ext In 1 Left +
3 Ext In 1 Right +
4 Ext In 2 Left +
5 Ext In 2 Right +
6 Ext In 3 Left +
7 Ext In 3 Right +
8 Ext In 4 Left +
9 Ext In 4 Right +
10 Chassis Ground
11 PFL (CUE) Out Left +
12 PFL (CUE) Out Right +
13 Aux 1 Out +
14 Aux 2 Out +
15 Clean Feed 1 Out +
16 Clean Feed 2 Out +
17 Cue Spkr 1 Out +
18 Cue Spkr 2 Out +
19 Chassis Ground
Pin Function
9 Logic Ground
10 Logic Ground
11 Logic Ground
12 RESERVED
13 RESERVED
14 Studio Mute B
15 CRM Mute B
Pin Function
20 Ext In 1 Left -
21 Ext In 1 Right -
22 Ext In 2 Left -
23 Ext In 2 Right -
24 Ext In 3 Left -
25 Ext In 3 Right -
26 Ext In 4 Left -
27 Ext In 4 Right -
28 Audio Ground
29 PFL (CUE) Out Left -
30 PFL (CUE) Out Right -
31 Aux 1 Out -
32 Aux 2 Out -
33 Clean Feed 1 Out -
34 Clean Feed 2 Out -
35 Cue Spkr 1 Out -
36 Cue Spkr 2 Out -
37 Audio Ground
RM1d/RM1ds User Guide