Table of Contents
Advertisement
RM1d/RM1ds User Guide
Lexicon Ef
Lexicon Ef
fects
fects
Lexicon Ef
Lexicon Effects
Lexicon Ef
fects
fects
The RM1d has a built in Lexicon Digital Effects Processor that offers a range of superb effects
that can be used to add another dimension to On Air or production applications.
The effects are accessed by using either the AUX 1 or AUX 2 sends (or both in Stereo Mode) to
send signal from a selected channel into the Lexicon Digital Effects Processor. The effect output
is sent directly to either the STE1 (PROG) or STE2 (AUD) (or both) output busses.
The Choice of factory preset effects are as follows.
Choosing an Effect
1.
Before choosing one of the above effects, you must decide which of the AUX 1/AUX
2 busses will be used as the 'send' control to the Lexicon processor.
2.
To do this press either the AUX 1 or AUX 2 button in the Lexicon Digital Effects
Processor section to select which one will be the 'source'.
3.
Now press the FX EDIT button. The LCD display will show the currently loaded effect:
4.
Now press the flashing PRESETS button to enter the FX PRESETS menu. The LCD
display will show:
5.
You can now use the PARAMETER encoder to select one of the effects from the above
list.
6.
Once you have located the desired effect press the DOWN arrow button to select the
'FX PRESET RECALL' line of the LCD Display.
7.
Press the flashing PRESETS button to recall the chosen effect.
105
Advertisement
Table of Contents
