Table of Contents
Advertisement
56
Alternatively if the EDIT button is selected on Channel 1 and the INPUT 2 button is
not illuminated meaning that Input 1 is active, the LCD display will read:
5
Now use the PARAMETER encoder to scroll through the selection of different inputs
until you reach the desired input source.
As you scroll through the different input sources you will see the names of those
inputs appearing on the small LCD display at the top of the selected channel.
RM1d/s
You will also notice that the DIGITAL or ANALOGUE legend just below the small LCD
screen on the selected channel will illuminate, to confirm that the input source is
either digital or analogue.
RM1d/s
6
You may now repeat the above procedure for the alternate input on the selected
channel
7
If you are happy with your selection then press the EDIT button on the next channel you
want to set-up.
8
Press the SETUP button to exit the Menu.
NOTE: You can also use the PARAMETER encoder to select the channel and input number
without using the EDIT buttons to select the channels.
NOTE: On 12 fader consoles the SPDIF-1 input can only be selected to one of the first six
faders (1-6) and the SPDIF-2 input can only be selected to one of the last six faders
(7-12).
RM1d
RM1d
RM1d/RM1ds User Guide
Advertisement
Table of Contents
