Installation - Replacing Product - Salus VS20WRF User Manual

iT600 VS20W - Installer - User Manual 011_Layout 1 07.07.2014 10:38 Stron

Installation - Replacing product

Before replacing any device it must be removed from the Zigbee network.
Please ensure the Zigbee coordinator is also in pairing mode.
Deleting Wiring Centre from the network.
If the wiring centre cannot be deleted
as above, use the method below.
Press for 15
seconds to delete
the wiring centre
from the network.
Please follow step 1
on page 47. Select
password 46.
All LED's will flash
momentarily and
then the wiring centre will
be deleted from the
network. All thermostats
relating to the wiring centre
will need to be reconfigured
and paired with the new
wiring centre.
VS20WRF and VS20BRF Installer Manual
You are now
ready to
install your
new wiring
centre.
55