iT600 VS20W - Installer - User Manual 011_Layout 1 07.07.2014 10:37 Stron
Installation - Pairing with System Receiver RX2
Checklist
1
The coordinator must be in pairing mode.
The system receiver (RX2) is powered up and the red LED
2
is steady. Refer to RX10RF manual.
If you are using the optional system receiver configured to RX1 for remote
3
boiler switching. Ensure this has been powered up and the red flashing
LED has gone steady. Refer to RX10RF manual.
Refer to system receiver manual.
VS20WRF and VS20BRF Installer Manual
System
Receiver
Configured
to RX2
single room
receiver.
41