iT600 VS20W - Installer - User Manual 011_Layout 1 07.07.2014 10:37 Stron
Installation - Testing Pairing with System Receiver RX1 only
Long press to exit
to home screen or
continue to change
device settings.
Refer to page 57.
Use
to
increase temperature
to 30ºC and then
press
Use
to
decrease temperature
to 10ºC and then
press
If pairing for your system is complete, please take the coordinator
out of pair mode. Press for 5 seconds and light will stop flashing.
46
VS20WRF and VS20BRF Installer Manual
Green LED on
Green LED off