Cisco WAP371 Administration Manual page 94

Wireless
WorkGroup Bridge
STEP 5
Cisco Small Business WAP371 Wireless Access Point Administration Guide
• Security—The type of security to use for authenticating as a client station on the
upstream WAP device. Choices are:
- None
- Static WEP
- WPA Personal
- WPA Enterprise
• VLAN ID—The VLAN associated with the BSS.
The Infrastructure Client Interface will be associated with the upstream WAP
NOTE
device with the configured credentials. The WAP device may obtain its IP address from
a DHCP server on the upstream link. Alternatively, you can assign a static IP address.
The Connection Status field indicates whether the WAP is connected to the upstream
WAP device. You can click the Refresh button at the top of the page to view the latest
connection status.
Configure the following additional fields for the Access Point Interface:
• Status—Select Enable for the Access Point Interface.
• SSID—The SSID for the Access Point Interface does not need to be the same as the
Infrastructure Client SSID. However, if attempting to support a roaming type of
scenario, the SSID and security must be the same.
• SSID Broadcast—Select if you want the downstream SSID to be broadcast. SSID
Broadcast is enabled by default.
• Security—The type of security to use for authenticating. Choices are:
- None
- Static WEP
- WPA Personal
• MAC Filtering—Select one of these options:
- Disabled—The set of clients in the APs BSS that can access the upstream network
is not restricted to the clients specified in a MAC address list.
- Local—The set of clients in the APs BSS that can access the upstream network is
restricted to the clients specified in a locally defined MAC address list.
5
90