Http/Https Service - Cisco WAP371 Administration Manual

Administration

HTTP/HTTPS Service

HTTP/HTTPS Service
STEP 1
STEP 2
STEP 3
Cisco Small Business WAP371 Wireless Access Point Administration Guide
Use the HTTP/HTTPS Service page to enable and configure web-based management
connections. If HTTPS is used for secure management sessions, you also use the HTTP/
HTTPS Service page to manage the required SSL certificates.
Configuring HTTP and HTTPS Services
To configure HTTP and HTTP services:
Select Administration > HTTP/HTTPS Service in the navigation pane.
Configure these Global Settings:
• Maximum Sessions—The number of web sessions, including both HTTP and HTTPS,
that can be in use at the same time.
When a user logs on to the WAP device configuration utility, a session is created. This
session is maintained until the user logs off or the Session Timeout expires. The range
is from 1 to 10 sessions. The default is 5. If the maximum number of sessions is reached,
the next user who attempts to log on to the configuration utility receives an error
message about the session limit.
• Session Timeout—The maximum amount of time, in minutes, an inactive user remains
logged on to the WAP device configuration utility. When the configured timeout is
reached, the user is automatically logged off. The range is from 1 to 60 minutes. The
default is 10 minutes.
Configure HTTP and HTTPS services:
• HTTP Server—Enables access through HTTP. By default, HTTP access is enabled. If
you disable it, any current connections using that protocol are disconnected.
• HTTP Port—The logical port number to use for HTTP connections, from 1025 to
65535. The default port number for HTTP connections is the well-known IANA port
number 80.
• HTTPS Server—Enables access through secure HTTP. By default, HTTPS access is
enabled. If you disable it, any current connections using that protocol are disconnected.
• HTTPS Port—The logical port number to use for HTTP connections, from 1025 to
65535. The default port number for HTTP connections is the well-known IANA port
number 443.
• Redirect HTTP to HTTPS—Redirects management HTTP access attempts on the HTTP
port to the HTTPS port. This field is available only when HTTP access is disabled.
3
32