Access Points - Cisco WAP371 Administration Manual

Single Point Setup

Access Points

Access Points
Cisco Small Business WAP371 Wireless Access Point Administration Guide
Radio Configuration Settings and Parameters that are Propagated in Single Point Setup
Short Guard Interval Supported
Radio Configuration Settings and Parameters that are Not Propagated in Single Point Setup
Channel
Beacon Interval
DTIM Period
Maximum Stations
Transmit Power
Other Configuration Settings and Parameters That Are Not Propagated in Single Point
Setup
Bandwidth Utilization
Bonjour
IPv6 Address
IPv6 Tunnel
Packet Capture
The Access Points page allows you to enable or disable Single Point Setup on a WAP device,
view the cluster members, and configure the location and cluster name for a member. You can
also click the IP address of a member to configure and view data on that device.
Configuring the WAP Device for Single Point Setup
To configure the location and name of an individual Single Point Setup cluster member:
Port Settings
VLAN and IPv4
WDS Bridge
WPS
WorkGroup Bridge
10
146