Instance Configuration - Cisco WAP371 Administration Manual

Cisco wireless-ac/n dual radio access point with single point setup
Hide thumbs Also See for WAP371:
Table of Contents

Advertisement

Captive Portal

Instance Configuration

STEP 4
Instance Configuration
NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business WAP371 Wireless Access Point Administration Guide
value configured here has precedence over the value configured for the captive portal
instance, unless the user value is set to 0. When set to 0, the timeout value configured
for the CP instance is used.
Group Name—The assigned user group. Each CP instance is configured to support a
particular group of users.
Maximum Bandwidth Up—The maximum upload speed, in megabits per second, that
a client can transmit traffic when using the captive portal. This setting limits the
bandwidth used to send data into the network. The range is from 0 to 300 Mbps. The
default is 0.
Maximum Bandwidth Down—The maximum download speed, in megabits per second,
that a client can receive traffic when using the captive portal. This setting limits the
bandwidth used to receive data from the network. The range is from 0 to 300 Mbps. The
default is 0.
Delete User—Deletes the current user.
Click Save. The changes are saved to the Startup Configuration.
You can create up to two Captive Portal instances; each CP instance is a defined set of instance
parameters. Instances can be associated with one or more VAPs. Different instances can be
configured to respond differently to users as they attempt to access the associated VAP.
Before you create an instance, review these bullets first:
Do you need to add a new VAP? If yes, go to
Do you need to add a new group? If yes, go to
Do you need to add a new user? If yes, go to
To create a CP instance and configure its settings:
Select Captive Portal > Instance Configuration in the navigation pane.
Ensure that Create is selected from the Captive Portal Instances list.
Enter an Instance Name and click Save. The instance name can include from 1 to 32
alphanumeric characters and the underscore.
Networks
to add a VAP.
Local Groups
to add a group.
Local Users
to add a user.
9
131

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents