Discovery-Bonjour - Cisco WAP371 Administration Manual

Administration
Discovery—Bonjour
STEP 1
STEP 2
STEP 3
Discovery—Bonjour
STEP 1
STEP 2
Cisco Small Business WAP371 Wireless Access Point Administration Guide
To reboot the WAP, select Administration > Reboot in the navigation pane.
Select one of these options:
• Reboot—Reboots the WAP using Startup Configuration.
• Reboot to Factory Default—Reboots the WAP using the factory default configuration
file. Any customized settings are lost.
A window appears to enable you to confirm or cancel the reboot. The current management
session might be terminated.
Click OK to reboot.
Bonjour enables the AP and its services to be discovered by using multicast DNS (mDNS).
Bonjour advertises services to the network and answers queries for the service types that it
supports, simplifying network configuration in small business environments.
The AP advertises these service types:
• Cisco-specific device description (csco-sb)—This service enables clients to discover
Cisco WAP devices and other products deployed in small business networks.
• Management user interfaces—This service identifies the management interfaces
available on the WAP device (HTTP, HTTPS and SNMP).
When a Bonjour-enabled WAP device is attached to a network, any Bonjour client can
discover and get access to the configuration utility without prior configuration.
A system administrator can use an installed Internet Explorer plug-in to discover the WAP
device. The web-based configuration utility shows up as a tab in the browser.
Bonjour works in both IPv4 and IPv6 networks.
Bonjour is enabled by default. To change the administrative status:
Select Administration > Discovery - Bonjour in the navigation pane.
Click Enable to enable Bonjour or clear Enable to disable Bonjour.
3
40