Administration
User Accounts
STEP 3
STEP 4
STEP 5
STEP 6
NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business WAP371 Wireless Access Point Administration Guide
Check the box for the new user and select Edit.
Enter a User Name between 1 to 32 alphanumeric characters. Only numbers 0 to 9 and letters
a to z (upper or lower) are allowed for user names.
Enter a New Password between 1 and 64 characters and then enter the same password in the
Confirm New Password text box.
As you enter a password, the number and color of vertical bars changes to indicate the
password strength, as follows:
•
Red—The password fails to meet the minimum complexity requirements.
•
Orange—The password meets the minimum complexity requirements but the password
strength is weak.
•
Green—The password is strong.
Click Save. The changes are saved to the Startup Configuration.
To delete a user, select the check box next to the user name and select Delete. To save your
deletion permanently, select Save when complete.
Changing a User Password
To change a user password:
Select Administration > User Accounts in the navigation pane.
The User Account Table shows the currently configured users. The user cisco is preconfigured
in the system to have Read/Write privileges. The password for the user cisco can be changed.
Select the user to configure and click Edit.
Enter a New Password between 1 and 64 characters and then enter the same password in the
Confirm New Password text box.
As you enter a password, the number and color of vertical bars changes to indicate the
password strength, as follows:
•
Red—The password fails to meet the minimum complexity requirements.
•
Orange—The password meets the minimum complexity requirements but the password
strength is weak.
•
Green—The password is strong.
3
24