Cisco WAP371 Administration Manual page 85

Wireless
Scheduler
STEP 3
STEP 4
STEP 5
STEP 6
NOTE
NOTE
Cisco Small Business WAP371 Wireless Access Point Administration Guide
The new rule shows in the rule table.
Check the box next to the Profile Name and click Edit.
From the Day of the Week menu, select the recurring schedule for the rule. You can configure
the rule to occur daily, each weekday, each weekend day (Saturday and Sunday), or any single
day of the week.
Set the start and end times:
• Start Time—The time when the radio or VAP is operationally enabled. The time is in
HH:MM 24-hour format. The range is <00-23>:<00-59>. The default is 00:00.
• End Time—The time when the radio or VAP is operationally disabled. The time is in
HH:MM 24-hour format. The range is <00-23>:<00-59>. The default is 00:00.
Click Save. The changes are saved to the Startup Configuration.
A Scheduler profile must be associated with a radio interface or a VAP interface to be in effect.
See the Scheduler Association
To delete a rule, select the profile from the Profile Name column and click Delete.
Scope of Scheduler Rules
The scope of scheduler rules is described below.
• A rule that sets only a specific day does not affect the other days.
• A rule that uses groups such as "Daily," "Weekday," or "Weekend" affects multiple
days.
• A rule you set for "Weekend" would only affect Saturday and Sunday while the rest of
the days are unaffected. The default scheduler behavior is that the radio is enabled
when there is no explicit rule on that day control how long the radio should be enabled.
• The design of the scheduler feature is such that each rule sets a boundary on when a
radio or VAP is enabled.
• The "Day of the Week" entry creates the scope for the rules. The rule ONLY impacts
the defined scope. Weekend meaning only Sunday and Saturday. Daily meaning every
day, etc. When setting the rules, the "Day of the Week" GUI entry defines the rule
scope: Weekend, Daily, WeekDay, Sunday, Monday, etc.
• This allows for detailed rules. There is no implicit deny all rule created when a scope
does not include every day of the week. Create a "deny" or "disable" rule by setting
the appropriate scope to be enabled only for 1 minute.To have the radio or VAP
disabled all the time EXCEPT for explicitly allowed times would require a "Daily"
page.
5
81