Cisco WAP371 Administration Manual page 9

Getting Started
Using the Access Point Setup Wizard
STEP 17
STEP 18
STEP 19
STEP 20
STEP 21
STEP 22
STEP 23
STEP 24
STEP 25
STEP 26
STEP 27
STEP 28
Cisco Small Business WAP371 Wireless Access Point Administration Guide
The Wizard displays the Enable Captive Portal - Create Your Guest Network window.
Select whether or not to set up an authentication method for guests on your network, and click
Next.
If you click No, skip to
If you click Yes, the Wizard displays the Enable Captive Portal - Name Your Guest Network
window.
Specify a Guest Network Name for Radio 1. For the WAP371 device, select whether the guest
network uses Radio 1 or Radio 2.
Click Next. The Wizard displays the Enable Captive Portal - Secure Your Guest Network
window.
Choose a security encryption type for the guest network and enter a security key. For a
description of these options, see
Click Next. The Wizard displays the Enable Captive Portal - Assign the VLAN ID window.
Specify a VLAN ID for the guest network. The guest network VLAN ID should be different
from the management VLAN ID.
Click Next. The Wizard displays the Enable Captive Portal - Enable Redirect URL window.
Select Enable Redirect URL and specify a fully qualified domain name or IP address in the
Redirect URL field (including http://). If specified, guest network users are redirected to the
specified URL after authenticating.
Click Next. The Wizard displays the Summary - Confirm Your Settings window.
Review the settings that you configured. Click Back to reconfigure one or more settings. If
you click Cancel, all settings are returned to the previous or default values.
If they are correct, click Submit. Your WAP setup settings are saved and a confirmation
window appears.
Click Finish. The Login window appears to log in to the AP using the changed password.
STEP 25.
System Security.
1
5