Ipv6 Addresses - Cisco WAP371 Administration Manual

LAN

IPv6 Addresses

STEP 3
STEP 4
NOTE
IPv6 Addresses
STEP 1
STEP 2
Cisco Small Business WAP371 Wireless Access Point Administration Guide
This VLAN is also the default untagged VLAN. If you already have a management
VLAN configured on your network with a different VLAN ID, you must change the
VLAN ID of the management VLAN on the WAP device.
Configure these IPv4 settings:
• Connection Type—By default, the DHCP client on the WAP371 automatically
broadcasts requests for network information. If you want to use a static IP address, you
must disable the DHCP client and manually configure the IP address and other network
information.
Select one of these values from the list:
- DHCP—The AP acquires its IP address from a DHCP server on the LAN.
- Static IP—You manually configure the IPv4 address. The IPv4 address should be in
a form similar to xxx.xxx.xxx.xxx (192.0.2.10).
• Static IP Address, Subnet Mask, and Default Gateway—If you elected to assign a static
IP address, enter the IP information.
• Domain Name Servers—Select an option from the list:
- Dynamic—The AP acquires DNS server addresses from a DHCP server on the
LAN.
- Manual—You manually configure one or more DNS server addresses. Enter up to
two IP addresses in the text boxes.
Click Save. The changes are saved to the Startup Configuration.
After new settings are saved, the corresponding processes may be stopped and restarted. When
this happens, the WAP device may lose connectivity. We recommend that you change WAP
device settings when a loss of connectivity will least affect your wireless clients.
You can use the IPv6 Addresses page to configure the WAP device to use IPv6 addresses.
To configure IPv6 address settings:
Select LAN > IPv6 Addresses in the navigation area.
Configure the following settings:
• IPv6 Connection Type—Choose how the WAP device obtains an IPv6 address:
4
51