Setting List - Zoom A1 FOUR Quick Manual

Setting list

Press to open the SETTING screen.
Press –
spond to the icons.
1. CHAIN (effect reordering)
Effects in the current patch memory are shown in a list, and can be reordered by pressing
– for the starting location and destination.
2. PATCH (edit patch memory names and adjust volume)
Item Explanation
CHAR Change the character at the cursor position in the patch memory name.
Move the cursor position in the patch memory name.
SKIP Change the type of character at the cursor position in the patch memory name.
VALUE Adjust the patch memory volume.
3. SAVE (save and swap patch memories)
To save a patch memory by overwriting another patch memory, use
to select a patch memory number, and press
To swap a patch memory, turn
4. SETUP (set operation functions)
Item Explanation
BPM Set the tempo used for the effects, rhythms and looper.
AUTO SAVE This function can automatically save effect parameter changes when they are made.
When OFF, a save confirmation screen will open whenever you switch patch memories.
PRESELECT
Use this function to select a non-adjacent patch memory and switch to it directly. Use
and
BANK HOLD
Limit to patch memories in the same bank when using
patch memories.
5. PWR/LCD (make power and the display settings)
Item Explanation
BATTERY Set the type of battery used so the amount of remaining battery charge can
be accurately shown.
ECO The power can automatically turn off if no use occurs for 10 hours.
BACKLIGHT Set how long the display backlight stays illuminated.
CONTRAST Adjust the display contrast.
HINT
See the Operation Manual for detailed information about each setting.
to open the following settings, which corre-
to select the patch memory, and press
and
to select SWAP when conducting the procedure above.
14
1 2 3
, and
at the same time.
and at the same time.
and
4 5
–
to switch