Ricoh C23535 Operating Instructions Manual page 1720

Monitoring and Configuring the Printer
Replace Develop. Unit (Magenta)
Replace Develop. Unit (Yellow)
Replace Feed Belt
Replace Feed Roller
Replace Fuser Oil Unit
2
Replace Fusing Unit
Replace PCU
Replace PCU(Color)
Replace Sustainer Unit
Replace Toner Suction Motor
Replace Transfer Belt
Replace Transfer Cleaning Unit
Retarding...
SD Card Authentication failed
Setting Remotely
Shift Tray
Skipped due to Error
Storage Complete
Storage Failed
Supplies Order Call failed
Suspend / Resume Key Error
Transmission Aborted
Transmission Complete
Transmission Failed
Tray Error: Chaptering
Tray Error: Duplex Printing
Unit Left Open: ADF
Waiting for Job Suspension
Warming Up...
Note
❒ For details about UNIX commands, see UNIX Supplement.
❒ Check the error contents that may be printed in the configuration page. For
details about printing a configuration page, see Printer Reference.
94
Messages Description
It is time to replace the development unit (magenta).
It is exchange time of the development unit (yellow).
It is time to replace the feed belt.
It is time to replace the transfer roller.
It is time to replace the fuser oil unit.
It is time to replace the fusing unit.
It is time to replace the photoconductor unit.
It is time to replace the photoconductor unit(Color).
It is time to replace the sustainer unit.
It is time to replace the toner suction motor.
It is time to replace the transfer belt.
It is time to replace the transfer cleaning unit.
Printing has stopped momentarily to allow printed
sheets to dry.
SD card authentication failed.
The RDS setting is being processed.
Internal output tray is full.
Skipped the error.
The storage is complete.
The storage has failed.
The supply order call has failed.
Finisher stop button was pressed.
The transmission was interrupted.
The transmission completion was completed.
The transmission has failed.
The paper feed tray specification error has occurred
because chaptering as well as the normal paper use
the same tray for printing.
Selected paper tray cannot be used for duplex printing.
Document feeder is opened.
The machine is waiting for Job Suspension.
The machine is warming up.