Ricoh C23535 Operating Instructions Manual page 1900

UNIX Configuration
O
Perform a test print to make sure that the settings are correct.
# lpr -Pnp file_name
# lp -d np file_name
1
Note
❒ SunOS, UnixWare, and OpenServer appear on the screen, but they are not
supported. Use Solaris, HP-UX, or Linux.
❒ The IP address will be added to the /etc/hosts file.
❒ The host name will be added to the /etc/hosts file.
❒ When printing with the lp command, use ( _ ) instead of ( = ) and ( ; ) in-
stead of ( , ) for operating systems that cannot use ( = ) and ( , ) such as So-
laris 2.5 or later.
Reference
For details about lpr and lp, see p.16 "Printing Method".
For details about the device option, see p.21 "Specifying the Device Op-
tion".
Deleting the printer
To print using the lp or lpr command, the option specified when the installation
shell script is executed is used. Change the option in accordance with the work-
station you are using.
❖ BSD UNIX workstation, Linux
Delete the printer entry from /etc/printcap, and then execute the installation
shell script again. Select options during the setup process.
Alternatively, search the printer entry from /etc/printcap, and change its rp
capability to option setting.
❖ Solaris, HP-UX
Delete the printer entry, and then execute the installation shell script again.
Select options during the setup process. To delete the printer entry, follow the
procedure below:
A Stop the scheduler.
# /usr/sbin/lpshut
B
Delete the printer.
# /usr/sbin/lpadmin -x printer_name
C Restart the scheduler.
# /usr/lib/lpsched
10