Ricoh C23535 Operating Instructions Manual page 1737

Message
WINS wrong scopeID=<Scope ID>
wpa authentication Failed
wpa authentication started
wpa IEEE802.1X started
wpa connecting to authenticator
wpa link up
wpa probe response doesn't have IE.
wpa success authenticated
wpa success key received
wpa waiting for key
wpasupd start
wpasupd stop
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
Problem and solutions
An invalid scope ID was used.Use a valid
scope ID.
WPA authentication failed. Check the WPA
configuration.
WPA authentication has started.
WPA authentication has started.
WPA is connecting to authenticator.
WPA key exchange has finished, and commu-
nication has been terminated.
WPA probe response does not have IE.
WPA authentication was successful.
WPA key reception was successful.
Waiting for WPA key.
wpasupd has started.
wpasupd has ended.
Message List
2
111