Fax Transmission Functions - Kyocera ECOSYS M3540dn Operation Manual

Sending Faxes > Fax transmission functions

Fax transmission functions

To configure the settings for functions, press the key of the function you want to configure. You can also press the
[Function Menu] key to select from other functions displayed on the message display.
Operation Method (page 2-5)
For details on each function, see the table below.
Key
Cancels the current menu setting to
return to the menu one level higher.
Function
Quiet Mode Lower print and scan speed for quiet processing. Select
this mode when the running noise is uncomfortable.
Original Size Specify the original size to be scanned.
Original Image Select original image type.
FAX Resolution Set the resolution at which to scan originals.
Orig.Orientation Select the orientation of the original document top edge
to scan correct direction.
Continuous Scan Scan a large number of originals separately and then
produce as one job.
File Name Entry Adds a file name.
JobFinish Notice Send notice by e-mail when a job is complete.
FAX Delayed TX Specify a time for transmission.
FAX Direct TX Connect to the destination first and then scan the
original.
FAX RX Polling Initiate reception of a fax by controlling the receiving
machine.
FAX TX Report Print transmission results after transmission.
Density Adjust density.
Duplex Automatically scan 2-sided originals.
1
Selects the item displayed or changes the
numeric value.
Confirms the selected setting.
2
Description
3-19
Reference
page
page 3-20
page 3-20
page 3-20
page 3-21
page 3-21
page 3-21
page 3-21
page 3-21
page 3-22
page 3-23
page 5-22
page 3-24
page 3-24
page 3-24