Fax Transmission Functions - Kyocera ECOSYS M6530cdn Operation Manual

Sending Faxes > Fax transmission functions

Fax transmission functions

To configure the settings for functions, select the [Function Menu] key.
Operation Method (page 2-5)
5
Key
Key
NOTE
For the procedure for transmitting FAX, refer to the following:
Basic transmission procedure (page 3-2)
1
2
3
4
Function
Quiet Mode Lower print and scan speed for quiet processing. Select
this mode when the running noise is uncomfortable.
Original Size Specify the original size to be scanned.
Original Image Select original image type.
FAX Resolution Set the resolution at which to scan originals.
Orig.Orientation Select the orientation of the original document top edge
to scan correct direction.
Continuous Scan Scan a large number of originals separately and then
produce as one job.
File Name Entry Adds a file name.
JobFinish Notice Send notice by e-mail when a job is complete.
FAX Delayed TX Specify a time for transmission.
FAX Direct TX Connect to the destination first and then scan the
original.
FAX RX Polling This function allows you to start automatic transmission
of a document saved in the sending machine by dialing
from the receiving machine.
FAX TX Report Print transmission results after transmission.
Density Adjust density.
Duplex Automatically scan 2-sided originals.
Function
Manual Send This method allows you to send originals by pressing
the [Start] key after confirming that the telephone line
has connected to the receiving system.
Description
Description
3-16
1
Displays the function menu.
2
Selects the item displayed or changes
the numeric value.
3
Confirms the selected setting.
4
Cancels the current menu setting to
return to the menu one level higher.
5
Switches between on-hook and off-
hook when manually sending a FAX.
Reference
page
3-17
3-17
3-18
3-18
3-17
3-19
3-24
3-24
3-21
3-19
5-15
3-24
3-18
3-17
Reference
page
3-20