Fax Resolution; Orig.orientation; Continuous Scan; File Name Entry - Kyocera ECOSYS M3540dn Operation Manual

Sending Faxes > FAX Resolution

FAX Resolution

Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better
resolution also means larger file sizes and longer send times.
Item
200x100dpi Norm.(Normal)
200x200dpi Fine(Fine)
200x400dpi S.Fin(Super Fine)
400X400dpi U.Fin(Ultra Fine)
NOTE
The default setting is [200x100dpi Norm.]. The higher the resolution, the clearer the image, but the fax transmission
time is longer.

Orig.Orientation

To scan the original in the correct orientation, specify which side of the original is the top. To set a 2-sided original, the
orientation of the placed original must be set.

Continuous Scan

Scan a large number of originals in separate batches and then produce as one job. Originals will be scanned
continuously until you press [End Scan].

File Name Entry

Adds a file name. Additional information such as job number and date can also be set.
For details, refer to the machine's Operation Guide.

JobFinish Notice

Send e-mail notice when a job is complete.
For details, refer to the machine's Operation Guide.
It is possible to attach an image to the Job Finish Notice.
For details, refer to JobFinish Notice on page
when sending originals with standard size
characters
when sending originals
with relatively small characters and thin lines
when sending originals with minute characters and
lines
when sending originals with minute characters and
lines more finely
8-3.
3-21
Description
Typical character size: 10.5 point
Resolution Resolution
(example:
Typical character size: 8 point
(example:
Resolution Resolution
Typical character size: 6 point
(example:
Resolution Resolution
Typical character size: 6 point
(example:
Resolution Resolution
)
)
)
)