Kyocera ECOSYS M3540dn Operation Manual page 48

Sending Faxes > Basic transmission procedure
2
Press the [OK] key.
Display the send job status screen.
3
Press the [▲] or [▼] key to select the fax job to be sent by priority override.
Send Job Status:
0010 0123456789
0011 1234567890 . . .
0012 2345678901 . . .
Cancel Menu
4
Press [Menu].
5
Press the [▲] or [▼] key to select [PriorityOverride].
6
Press the [OK] key.
7
Press [Yes] in confirmation screen. The selected fax job is sent by priority override and
other fax jobs are moved down in the transmission queue.
NOTE
If a fax job is in progress, the priority override fax job will be sent after the job in progress is
completed.
If a broadcast transmission job is in progress...
If a fax job to multiple destinations (broadcast transmission) is in progress, the priority override
job will be sent when transmission to the current destination is completed. When the priority
override job is completed, transmission to the remaining destinations will resume.
However, if the priority override job is a broadcast transmission, the priority override job will
not start until the current broadcast transmission job is finished.
3-8