Polling Communication; Polling Transmission - Kyocera ECOSYS M3540dn Operation Manual

Hide thumbs Also See for ECOSYS M3540dn:
Table of Contents

Advertisement

Using Convenient Fax Functions > Polling Communication

Polling Communication

Polling communication is a communication mode in which the transmission of originals on the sending machine is
controlled by the receiving machine. This allows the receiving machine to tailor the reception of originals to its own
circumstances. This machine supports both polling transmission and polling reception.
IMPORTANT
Because the receiving machine dials the sending machine in polling communication, call charges are
normally borne by the recipient.

Polling Transmission

Originals to be used in polling transmissions should be stored in a Polling box. When a polling request is received from
the destination, the stored originals are sent automatically.
Once originals intended for polling transmission have been sent to the destination, they are automatically deleted.
However, if you set Delete Transmitted File to [Off], the originals are stored in the Polling box until you delete them. You
can use polling transmission with the same originals as many times as you wish. (Refer to
Polling Transmission on page
NOTE
You can store up to 10 originals for polling transmission.
You can also add to or overwrite originals up until a polling request arrives from the destination. Refer to
Setting on page
5-23.
Deleting Originals After Polling Transmission
Originals intended for polling transmission are automatically deleted after they have been sent to the destination. To
allow polling transmission of the same original to multiple destinations, set this option to [Off].
1
2
5-22.)
Display the screen.
1
Press the
[System
Menu/Counter] key.
2
Press the [▲] or [▼] key to select [Document Box].
3
Press the [OK] key.
4
Press the [▲] or [▼] key to select [Polling Box].
5
Press the [OK] key.
Configure the function.
1
Press the [▲] or [▼] key to select [Delete TX File].
2
Press the [OK] key.
3
Press the [▲] or [▼] key to select [On] or [Off].
4
Press the [OK] key.
5-22
Deleting Originals After
Overwrite

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents